Most of today's stone mill flour machinery have abandoned the original large amount of labor output and gradually transformed into the current mechanized production mode, and the feed configuration is a manifestation of technological upgrading. What are the specific feed configurations of stone mill flour machinery?

1）料斗。已經被處理好的小麥從料斗進入到石磨面粉機組進料系統中，等待加工。

1) Hopper. The treated wheat enters the feeding system of the stone mill flour unit from the hopper for processing.

2）限量板。控制設備的進料量，對石磨面粉加工設備的進料量和進料的速度進行調節。

2) Limited plate. Control the feeding amount of the equipment and adjust the feeding amount and speed of the stone mill flour processing equipment.

3）進料管。連接石磨面粉機組的進料系統和碾磨室。秀的進料管也是非常的重要的。

3) Feed pipe. Connect the feeding system and grinding room of the stone mill flour unit. The feed pipe is also very important.

石磨面粉機磨損速度快由于新磨粉機零部件加工、裝配和調整等因素的影響，其摩擦表面粗糙，配合面接觸面積較小，表面的承壓狀況不均。石磨面粉機在運行過程中，零件表面的凹凸部分相互嵌合摩擦，磨落下來的金屬碎屑，又作為磨料，繼續參與摩擦，更加速了零件配合表面的磨損。

Due to the influence of processing, assembly and adjustment of parts of the new flour mill, the friction surface is rough, the contact area of the mating surface is small, and the pressure bearing condition of the surface is uneven. During the operation of the stone mill flour mill, the concave convex parts on the surface of the parts are embedded and rubbed with each other. The ground metal debris, as an abrasive, continues to participate in the friction, which further accelerates the wear of the mating surface of the parts.